CLIPIC MECHA, Руководство пользователя

Страница: 109 / 154

109
Operation
7. Chain slider-check slider wear.
8. Throttle-check for smooth opening and full closing in all steering positions. Adjust
free play if necessary.
9. Clutch-check operation, and adjust if necessary.
10. Spark plug and high tension terminal-check for looseness.
11. Engine stop button-check for proper function.
12. Nuts, bolts, fasteners-check the front wheel to see that the axle nut and axle hol-
der nuts are tightened securely. Check security of all other nuts, bolts, and fasteners.
STARTING THE ENGINE
Always follow the proper starting procedure described below.
Your motorcycleÊs exhaust contains poisonous carbon monoxide gas. High levels of carbon
monoxide can collect rapidly in enclosed areas such as a garage. Do not run the engine with
the garage door closed. Even with the door open, run the engine only long enough to move
your motorcycle out of the garage.
Preparation
Before starting, insert the key and turn the ignition switch ON.
Make sure that the transmission is in neutral.
Turn the fuel valve ON.