manualshive.com logo in svg

Clipcomm CG-410, Руководство пользователя, Страница: 23 / 35

Поделиться
Скачать
Clipcomm CG-410 Скачать руководство пользователя страница 23

 

23

 

Size 

network condition. 

Change 

Password 

A 4-digit number password is required to enter the built-in 

web page of CG-410 or to upgrade the firmware by FTP. 

You can change the password by this tab. 

0000 

   

 

6.4. Configuring the PSTN Interface   

 

6.4.1. PSTN Volume 

You can control the volume of the voice that passes through the PSTN interface by adjusting the 

configuration menu. The bigger the number of item is, the bigger the volume is. (The default setting at 

factory reset is recommended.) 

 

6.4.2. Configuring the CPTD (Call Progress Tone Detection) 

Your CG-410 can detect various ‘call progress tones’ from PSTN, such as dial tone, ring back tone or 

busy tone by using the CPTD (Call Progress Tone Detection) functionality. It can release the PSTN 

line automatically when it detects the busy tone or congestion tone that can be heard after a call is 

released. 

You should configure the parameters of each call progress tone that matches your country’s 

specifications, since the parameters are not the same in many countries. By default, the CG-410 

provides the pre-programmed specifications of call progress tones in over 30 countries; Argentina, 

Australia, Austria, Canada, Chile, China, Denmark, Finland, Germany, Hong Kong, Japan, Korea, 

Mexico, Netherlands, Saudi Arabia, Singapore, Sweden, Turkey, U.K., U.S. and France, Venezuela, 

Philippines, Bulgaria, Egypt, Iraq, Lebanon, Russia, Syria, user’s defined call congress tone etc. If you 

use the CG-410 in one of those countries, you can just the select the country on the “System 

Configuration / PSTN” configuration web page. (Various specifications of call progress tones are 

defined in “VARIOUS TONES USED IN NATIONAL NETWORKS” ITU-T Recommendation E.180 

Supplement 2.)   

 

Otherwise, you should configure the parameters of call progress tones manually by selecting “User 

Defined” menu on the “Select Country” drop down list. Even if you are in one of those countries, you 

may have to configure the CG-410 manually. This is because the tone after a released call may not be 

a ‘busy tone’ or a ‘congestion tone’ in some countries. (By default, CG-410 releases the PSTN line 

Содержание CG-410




































Отзывы:

Нет отзывов