DROP SECTION
(models 81220, 81330, 81350, 81360 only)
OPTIONAL LOCKING CASTERS
(all models)
The drop section is located at the foot-end of the table and is shown below at left in a semi-extended position.
The drop section can be raised and lowered using the drop section levers on either side of the table. To lower
the drop section, place your hand under the upholstered top of the drop section and move the lever forward
towards the foot-end of the table. The lever must be kept in the forward position while gently lowering the drop
section. To raise the drop section, place your hand under the upholstered top and gently lift. The drop section
levers will automatically move forward and the drop section will lock into position wherever the lifting motion is
stopped.
Locking casters are an option on all models. The locking mechanism can be engaged by using your foot to
depressing the tab located at the rear of each caster. This locks the swivel of the caster and acts as a brake to
minimize movement of the wheel.
ALL FOUR CASTERS MUST BE LOCKED TO ENSURE MINIMAL MOVEMENT
OF THE TABLE.
Casters can be added or removed in the field.
ADJUSTMENTS
(continued)
Caster in the mobile position.
drop Section in the semi-raised position
drop Section in the down position
Caster in the lock position.
Stirrup Position 1