42
EVENT MENU > Motion > Action
RECORD:
Enable a DVR channel to record when motion is sensed by a another camera. Select ON to activate the
motion area.
The default setting is to only record the channel in which motion has occurred.
Example: Camera channel 1 will only record when camera 1 senses motion.
The RECORD (Motion Event) can be setup to record different cameras other than the selected channel.
Example: When channel 1 senses motion, recording is triggered on channel 2 and 4.
ALARM:
Select ON to enable an externally attached alarm. You can also apply a delay before the alarm is triggered,
and select the duration of the alarm (from 0-99 seconds).
BUZZER:
Select ON to enable an audible chime from the DVR when motion occurs.
PRESET:
Set the preset number. When motion occurs, a PTZ camera will move to the preset position. For information
on setting up PTZ presets see page 17.
E-MAIL:
Enabling this function will send an E-mail to the selected recipients when a motion event occurs.
MOTION>ACTION
: Assign different actions for the DVR to perform when motion is detected.
Recording
Motion
