background image

Contender Series DVR 

User Manual

6701 CLINTON ROAD • LOVES PARK, IL 61111 • 1-800-549-6393 (SUPPORT) • www.clintonelectronics.com

28

Chapter 8 – Operation

NOTE: This chapter assumes your DVR has been installed and configured. If it has not, please refer to
Chapters 1 - 7.

8.1 Login / Logout

Login

This system classifies user category as ADMIN, SUPERUSER, or USER limiting the access to system operation.
Each login authority level and access level has been summarized as below, and ADMIN level overrides all.
Press the MENU button to enter the setup screens. The Admin Password screen appears.

Figure 48 — Admin Password.

Enter the password by pressing the appropriate combination of Camera number buttons and then the Enter
button. The factory default password is 1111.

The login window appears when the following buttons are pressed.

Button (Function)

Log-in Authority

MENU

Admin

SEARCH

Superuser

BACKUP

Superuser

PTZ

User

Logout

To log-out from the system click the LOCK button at front panel to brute force log-out.

The DVR system automatically does log-out after a certain time is elapsed.  Menu Timeout that has been set to
System Setting is the time for predefined automatic log-out time.

Button

Function

Remarks

Lock

It locks DVR as Logout stage

Содержание Contender CE-DVR16






































Отзывы: