Clinton Electronics Contender CE-DVR16, Руководство пользователя

Страница: 11 / 37

Contender Series DVR User Manual
6701 CLINTON ROAD • LOVES PARK, IL 61111 • 1-800-549-6393 (SUPPORT) • www.clintonelectronics.com
10
From the GENERAL SETUP screen you can change the following:
Language : Select your desired language from the list.
Date/Time : Turns Date/Time ON or OFF (When turning off the DATE/TIME display, your DVR will not display the
date and time information on the screen.)
Date Format : Select between: MM-DD-YYYY, DD-MM-YYYY, or YYYY-MM-DD
Date : Set date using either the number or the UP & DOWN buttons on DVR or Remote.
Time : Set time using either the number or the UP & DOWN buttons on DVR or Remote.
Time Zone : If your region recognizes DST (Daylight Savings Time) press ENTER and select your time zone from
the list.
Use DST: If your region does not recognize DST leave DST OFF. If your region does recognize DST turn DST
ON. (You must be connected to LAN to use this function)
Buzzer : Turn ON or OFF “beep” sound.
Unit ID : To use one remote for multiple DVRs first you must change each DVR ID number:
Select Unit ID – press ENTER.
Set a different UNIT ID for each DVR (0-19).
Select ok - press ENTER
Select save - press ENTER.
The DVR is now set for that UNIT ID.
Now you can use the remote to select that particular DVR ID by:
Holding the ID button (#10) down.
Enter the DVR ID number using the remote keypad (#4). (You must enter “0” then the number for IDs 0-9)
Release the ID button.
The remote controller is now set for that DVR.
Menu Style : Choose from BASIC or PLUS. Default menu style is PLUS. You can set up the DVR using the
BASIC menu style however some features will be missing. To set in detail you have to change the menu style to
PLUS again.
3.4 Alarm Type
Select the ALARM TYPE in the main menu and press the ENTER button. The ALARM TYPE screen displays the
alarm inputs and outputs. Change TYPE from the ALARM IN to the ALARM OUT button by highlighting it and
pressing the ENTER button.
Select the proper alarm type between NO (Normally Open) and NC (Normally Close) by highlighting the box
below TYPE and pressing the ENTER button.
Save changes and return to the main menu by highlighting SAVE and pressing the ENTER button. Selecting
CANCEL exits the screen without saving the changes.