1. LENS
DC
2. EXPOSURE
3. WHITE BAL
ATW
4. BACKLIGHT
OFF
5. DNR
ON
6. DAY/NIGHT
AUTO
7. IMAGE ADJ
8. SPECIAL
9. EXIT
MAIN SETUP
This camera is designed to deliver a clear and distinct image of both subject
and background, even when the subject is in backlit, using a proprietary
SV-IV DSP chip.
1. Position the cursor to point to BACKLIGHT on the SETUP menu screen
using the Up and Down buttons.
2. Select a desired mode using the Left and Right buttons depending on the
camera purpose.
Note
• Under the following conditions White Balance may not work properly.
In such cases, select the AWC mode.
①
When the color temperature of the subject environment has a very
high temperature range (e.g. clear sky, or sunset)
②
When the ambient illumination of the subject is low.
③
If the camera is directed toward a fluorescent light, or is installed in
a place where illumination changes dramatically, the White Balance
operation may become unstable.
BACKLIGHT
■
How to Use the Camera
22
23
Super DNR High Resolution Color Dome Camera
Super DNR High Resolution Color Dome Camera
BLC ON
BLC OFF
●
BLC : Enables a user to directly select a desired area from a picture, and
to view the area more clearly.
●
OFF : Not being used
●
Select 'BLC' to adjust the area to be
enhanced and enhancement level.
●
HLC : Enable a user to select a mask
color of high light area from a picture.
●
HLC (High Light Compensation) :
If there is a high light installed in a limited environment such as an
apartment parking garage or gas station entrance, removing the
high light makes it possible to view car license plates efficiently.
- DAY : In normal daylight conditions, the HLC is not activated.
- NIGHT : If a high light that is larger than a certain size is present on
the screen, remove the high light to see license plates clearly.
HLC OFF
HLC ON
HLC MASKING AREA
3. Select a desired mode using the Left and Right buttons and press the SET button.
