Clinton Electronics CE-20DVRPVM-HD, Руководство пользователя

Страница: 19 / 30

19
COLOR
:
- AUTO: This camera has a function which automatically changes to the appropriate mode
for daytime or night-time. The camera is in COLOR mode for daytime, and automatically
switches to BW mode for night-time.
-ON: The color mode is selected by default, and the modes do not change automatically.
• When AGC is turned off, COLOR does not operate.
• When an infrared light is used, there may be a problem with focusing.
SYNC :
Two Synchronization modes are available: INTERNAL, and EXTERNAL
LINE-LOCK. In LINE- LOCK mode, the unit synchronizes the video signal
between cameras without a synchronous generator. The LINE-LOCK
synchronization is only used in the areas of 60Hz (NTSC Models) / 50Hz
(PAL Models).
• When the power frequency is 50Hz, you can not use the line-lock mode (NTSC Models)
• When the power frequency is 60Hz, you can not use the line-lock mode (PAL Models)
• SYNC mode is fixed to INT in 12VDC input power.
-INT: Internal synchronization
-LL: External line-lock synchronization
-If you choose “LL” you can adjust the desired phase. Press the SET button.
-You can adjust the desired phase from 0 to 359.
MOTION DETECTION :
This device has a feature that allows you to monitor movements of activity in 4 different
areas on the screen. The words “MOTION DETECTED” will appear on the screen when
movement is detected, allowing for a single person to conduct supervision efficiently.
The camera detects an object’s movement by sensing a change of outline, and level of
brightness and color.
• Press the SETUP button
- OFF: Motion detection mode is not active
- ON: Any motion in the selected areas will activate “MOTION
DETECTED” message
• Select the area you wish to observe from the 4 areas in AREA SEL.
• Turn areas 1-4 ON or OFF with AREA STATE
• Adjust the size of the motion detection area by using the UP, DOWN,
LEFT, and RIGHT buttons
• Press SET to enter the settings and return to the previous menu.