8
CHA - CHA/K
2.2
DESTINAZIONE D’USO
I CHA - CHA/K sono refrigeratori con condensazione
ad aria destinati a raffreddare acqua (eventualmente
addizionata con glicole etilenico inibito) che circola in
un anello chiuso. Le unità a pompa di calore possono,
a seconda del ciclo di funzionamento scelto, raffreddare
o riscaldare l’acqua dell’anello.
Le unità a recupero di calore , possono, come sottopro-
dotto, riscaldare dell’acqua che circola in un secondo
anello chiuso.
Il caldo, o il freddo, così prodotto può essere utilizzato per
impianti di climatizzazione o per processi industriali.
2.3
CONTROINDICAZIONI
Non impiegare in prossimità della macchina
prodotti infiammabili.
Non impiegare in prossimità della macchi-
na sostanze in grado di formare miscele
esplosive.
Non impiegare la macchina dove sussistono
problemi di impatto ambientale (vedi punto
3.5 pag. 13).
2.4
DESCRIZIONE GENERALE
Tutte le strutture sono realizzate in lamiera zincata con
ulteriore protezione ottenuta tramite verniciatura a polveri
poliestere. La struttura è autoportante ed i pannelli sono
facilmente rimovibili in modo da permettere l’accesso
all’interno della unità per le operazioni di manutenzione
e riparazione.
Gli schemi funzionali e la componentistica usata sono
allegati.
2.2
INTENDED USE
The CHA - CHA/K series of air condensation chillers
have been designed to cool water (possibly containing
inhibited ethylene glycol) circulating in a closed circuit.
The heat pump units can cool or heat the water in the
closed circuit depending on which operating cycle is
chosen.
The heat recovery units can also heat the water circulat-
ing in a second closed circuit.
The heat or cold produced can be used for air-conditioning
systems or industrial processes.
2.3
CONTRAINDICATIONS
Do not use inflammable products near the
unit.
Do not use substances that can form ex-
plosive mixtures near the unit.
Do not use the unit in conditions that could
be harmful for the environment (see point
3.5 on page 13).
2.4
GENERAL DESCRIPTION
All the unit structures are made from galvanised sheet
metal and are further protected with polyester powder
paints. The structure is free standing and the panels are
easy to remove in order to allow access to the inside of
the unit for maintenance and repair operations.
The functional diagrams and the components used are
attached to this manual.