Climer HTM EVI SERIES, Инструкция по установке и эксплуатации

Страница: 8 / 26

8
V0REV5ES1218
IMPORTANT: If the panel is installed at horizontal position, refrigerant inlet pipe should be
connected into the bottom connection.
- Distances to heating module:
• The maximum allowed distance from the farthest panel to the
heating module is 15 meters.
• It is recommended not to exceed 20 meters of total length from
the heating module to the panels.
- Gap between panels: A minimum distance of 50 cm between panels should be
kept in order to have enough space to fit the pipes and collectors.
In the picture below is shown the dimensions of the panel:
2. Anchoring panels
Beside the panels is supplied a bag with anchoring elements that contain the following
pieces (per each panel):
- 6 x Aluminium support (L shape)
- 6 x Screws M5
- 12 x Nuts M5
- 18 x Washer 5
- 18 x Sheet Metal Screws
- 18 x Blocks M6
Anchor the panels using the lateral and front holes to the suitable surface.
c. Liquid distributor connections
1700
800