ClimbTech EAL12NC-72Y-C13, Руководство по эксплуатации и инструкция

Страница: 9 / 12

Part Number Comments Inspector Name Date
MODEL NUMBER:
DATE OF MANUFACTURE:
INSPECTION AND MAINTENANCE LOG
*If any damage that could affect the strength or operation of the device, or unsafe
conditions are found, proper disposal is required. The full body harness must be
rendered unusable and then properly discarded.
INSPECTION GUIDELINES
Official periodic inspection must be made at least semiannually. The inspection must be performed by a
qualified person other than the intended user. If severe weather or conditions exist then inspections must be
1. Inspect webbing and stitching for damage due to cuts, abrasion, tears, excessive heat,
chemical contact, excessive stretching, ultraviolet deterioration, rotting, mildew, and any other
factors that may interfere with proper function of the connecting subsystem.
2. Inspect stitching for cut, worn, or unraveling threads.
3.
Inspect hardware for cracks, dents, wear, sharp edges, corrosion, deformation, alternations, or
other damage that may interfere with proper function of the connection subsystem.
4.
Ensure Energy Absorber has not been deployed.
5. Gates and safeties of Anchorage Connectors and Dorsal D-Ring Connector should
automatically close and lock. Lubricate as instructed if necessary.
6.
Markings must appear legibly as shown in user instructions.
7. Inspect for any additional conditions that may render the product unsuitable for use as a
connecting subsystem.
8.
Record inspection results in the INSPECTION AND MAINTENANCE LOG.