11
3. Getting Started
Read this section of the manual to learn how to set up your VST-1818-R3 IP Camera
and program system settings over the Web page.
With a valid internet connection, this system can bring you the freedom to access and
control your IP Camera anywhere and anytime in the world.
3.1. Hardware Installation
Step 1.
Remove any plastic cover and prepare the enclosed adapter and Ethernet
cables.
With Wired Connection:
Step 2.
Find a suitable location to mount the IP Camera.
Step 3.
Plug in the enclosed Ethernet cable.
<NOTE>
If the IP Camera is to complement with a Control Panel, connect the IP Camera
and the Control Panel to the same router to learn the IP Camera into the Control
Panel. Please refer to
11. Connecting to the Climax Control Panels
if you
wish to increase the functionality of the IP Camera.
Step 4.
Plug in the adapter.
With Wi-Fi (Wireless) Connection:
Please refer to the
6. Network Setting. 6.2. Wireless
on how to connect to the Wi-Fi
Network.
