34
Locate the
WPS button
on your VST-1818-R3 IP Camera and your wireless router.
Press and hold the WPS button of the IP Camera for 2-3 seconds and when the Blue
LED flashes, let go of the button. The Red LED will flash for 1-2 seconds.
Press and hold the WPS button of the router’s WPS protocol according to the
router’s instruction to start pairing.
When WPS pairing is successful, the Red LED of IP Camera
will
flash 3 times.
<NOTE>
After wireless information are successfully entered or when WPS pairing has
succeeded, please reboot the system and ONLY choose one type of connection
(either wired or wireless) at a time.
For wireless connection, please remove the network cable and the power cable.
Reconnect the power cable only and wait for it to start up.
If you wish to restore wired connection, please unplug the power cable, connect
the network cable and reconnect the power cable.
