69
6.1.5.3 Speech Reporting Method
If speech reporting method is selected, Mobile Lite will dial the
programmed number for reporting. It will establish a two-way voice
communication between the call recipient and Mobile Lite user.
If Mobile Silent is enabled on Mobile Lite, a Listen-In only communication
will be established instead.
The CMS can remotely control Mobile Lite during the voice
communication period using the DTMF commands below:
- Enter (
1
) for talk-only mode.
- Enter (
2
) for two-way voice communication.
- Enter (
3
) for listen-in only mode.
- Enter (
9
) to hang up.
- Put the handset back to the base cradle to end the call.
- Press and hold the Active Button of Mobile Lite for 5 seconds, or press
the Active Button of RF device (WTR, Fall Sensor or PB) once to end
the call.
- Press any DTMF key except for the designated hang-up key (
9
) to
reset the communication time to its preset duration. When a DTMF key
is pressed, its designed shortcut function will also be executed along
with the communication time reset.
At 20 and 10 seconds before the communication time expires, Mobile Lite
will emit 1 beep via the telephone handset to alert the user.
If no DTMF command is pressed during the speech period, the call will
automatically hang up and be recorded as an unsuccessful report. Each
phone number will be retried up to a maximum of 5 times accordingly.
During two-way communication, Mobile Lite location info will be updated
every minute, if there was a successful IP report before the current
two-way communication, the location updates will be reported in event
code 100/101/120 via the previously successful IP channel.
<
<
N
N
O
O
T
T
E
E
>
>
If you wish to enable a designed shortcut function, please press the DTMF
key for at least 1 second.
The function of pressing sensor button to end call is now programmable
via PC Programming Tool or SMS command. Default is disabled.
Please note that during two-way communication, do to insert Mobile Lite
into the Base or remove Mobile Lite from the base. Inserting or removing
Mobile Lite will end two-way communication.
