Climax Mobile Lite-R15 Slim, Руководство по установке, Страница: 46 / 62

43
Wi-Fi hotspots, other wireless access points and store the data according
set time interval. If Wi-Fi data cannot be obtained, Mobile Lite will check
GPS location instead.
When Mobile Lite button is pressed and alarm is activated, it will begin to
check last position while acquiring new Location and count down Guard
Time.

Mobile Lite will check Last Location by transmitting last stored Wi-Fi
hotspot data to Google Wi-Fi positioning service for location
identification or using last acquired GPS location. (GPS function is
only turned on when no Wi-Fi hotspot data is obtained.)

Mobile Lite will acquire new location using Wi-Fi and GPS positioning.

If new location is acquired within guard time, the alarm report (event
code 100/101/120) is made immediately with the new location
coordinates.

If new location is not acquired by the time Guard Time ends, Mobile
Lite will send report (event code 100/101/120) with last location.
If there is no Last Location data stored, or it is older than 8 hours,
Mobile Lite will disregard it and send report (event code 100/101/120)
without location.
After new position is acquired, Mobile Lite will follow up with another
report in event code 645.
If new position is acquired, and
it’s in two-way communication
following a successful IP report, Mobile Lite will make report in event
code 100/101/120 with location info via the previously successful IP
channel. Mobile Lite will keep updating and reporting location info
every minute in event 100/101/120 before two-way communication
ends.
Example:
1. If Guard Time = 30 seconds, new Location acquired within Guard Time:
Mobile Lite makes alarm report (CID 100/101/120) upon Guard Time
expiry along with new Location coordinates.
2. If Guard Time = 30 seconds, new Location is NOT acquired within Guard
Time:
a. If Mobile Lite has Last Location, it makes alarm report (CID
100/101/120) along with location coordinates after Guard Time has
expired.
b. If Mobile Lite does not have Last Location, or the Last Location is
older than 8 hours, it makes alarm report (CID 100/101/120) without
Location coordinates after Guard Time has expired.