Climax Mobile Lite-R15 Slim, Руководство по установке, Страница: 32 / 62

29

When this function is set to
“Off”, silent mode is turned off.

When Mobile Silent is enabled, a Listen-in only communication will
be established initially for Speech Reporting. The call recipient can
enter DTMF keys to change communication types (please refer to
6.5. Alarm Activation for more details).

Speaker Volume Level

Adjust the speaker volume of Mobile Lite from a scale of 1-5, where
1 = minimum speaker volume
5 = maximum speaker volume (default)

Answering Incoming Calls:

Off: Mobile Lite remains silent when there is an incoming call.

Enable(Ring): Mobile Lite will ring when there is an incoming call.
Press the Active Button to answer the call.

Enable(Auto-Answer): Mobile Lite will auto-answer an incoming call.
Depending on the setting of
“Incoming Call Check Access Code”
(see below), Mobile Lite will check the Access Code or not before it
opens a full-duplex Two-way communication.

Incoming Call Check Access code:

When set as
“Disable”, Mobile Lite will auto answer an incoming call
and open a full-duplex Two-way communication without checking
the Access Code (default: 1111).

When set as
“Enable”, Mobile Lite auto answer an incoming call
(after the first ring), and wait for the correct Access Code (default:
1111) and
# key entry within 15 seconds before it opens a full-duplex
Two-way communication. If the correct Access Code (and the # key)
are not entered within 15 seconds, the system will disconnect the
call automatically.

Press sensor button to end call:

Enable: When enabled, pressing the Active Button of RF device
(WTR, Fall Sensor or PB) once will end two-way communication.

Disable: When disabled, pressing the Active Button of RF device will
NOT end two-way communication. (Default)

Voice Prompt

Enable: Mobile Lite will play voice prompts accordingly.

Disable: Mobile Lite will not play voice prompts.

Fall Detection