Climax Mobile Lite-R15 Slim, Руководство по установке, Страница: 23 / 62

20
- If reporting to all the programmed groups failed in a reporting
cycle, Mobile Lite will wait for 5 minutes. After 5 minutes,
Mobile Lite will retry as it starts another reporting cycle.
For Emergency event, Mobile Lite will try reporting for up to
three reporting cycles. If going through three reporting cycles
and all failed, Mobile Lite will terminate reporting.
Example 1, if Groups 1 and 3 are programmed for
“Emergency”
reports, and assuming NO successful report until Group 1 is
successful after the second try:
Group 1 > Group 3 > Wait 5 minutes > Group 1 (Success!) >
Group 3 > Stops reporting whether Group 3 is successful or
not.
Example 2, if Groups 1 and 3 are programmed for
“Emergency”
reports, and assuming there is NO successful report:
Group 1 > Group 3 > Wait 5 minutes > Group 1 > Group 3 >
Wait 5 minutes > Group 1 > Group 3 > Stops reporting

Status Events :
Mobile Lite will only go through one reporting cycle for Status reports.
For example, if Groups 1 and 3 are programmed for
“Status” reports:
Group 1 > Group 3 > Stops reporting whether Groups 1 and 3
succeeded or not
SMS Report text format

Below are the SMS Text messages sent to user according to the condition
of the Mobile Lite.
SMS text table:
Mobile Lite Condition SMS Text format
Low battery status Mobile Lite Low Battery
Battery voltage restored Mobile Lite Battery Restored
Wakes up time Mobile Lite Periodic Test
GPS signal lost Mobile Lite GPS Signal Failure
Carrier leaves GeoFence area Mobile Lite has exit GeoFence Area
Carrier enters GeoFence area Mobile Lite has entered GeoFence
Area

When help is sent by pressing the Mobile Lite
’s Button, in which according
to CID event code, the user will receive SMS text format as follows: