Climax FF6300, Руководство по эксплуатации

Страница: 74 / 132

Page 58 FF6300 Operating Manual
Before starting the machine, always check the following:
• All energy supplies are OFF and the system reset button is released.
• Check that the machine is securely mounted to the work piece.
• Check that all the lines,
cables, and hoses are prop-
erly connected and secured
away from moving parts.
A lightweight bracket is
supplied in the tool kit for
securing the hoses as
shown in Figure 4-1.
WARNING
Broken air or hydraulic lines
can whip around, striking the
operator or bystanders. Always
check that the supply lines to
the machine are secure and cannot be hit by moving parts.
• For hydraulically driven machines check that all hoses and fittings are leak
free. Hydraulic oil leaks could contaminate the environment or cause a
slipping hazard. Clean up any spills, and repair any leaks before operating
this machine.
• Check that all the machine parts are secure, including the tool head, tool
bit, chucks, and clamps.
• Check that the tool head is set at the desired angle and is tight.
• Check that the feed direction and rate are set correctly (Section 3.12 on
page 48).
CAUTION
Check that the turning arm is securely clamped to the main body and that it
will not hit any obstructions around the workpiece. Check that there is
clearance by manually rotating the machine one full revolution.
• Check that all handles and tools are removed from the machine.
• Check that all preventative maintenance is complete (Section 5) and the
drip rate is set correctly on the pneumatic conditioning unit (PCU). Refer to
Section 5.3.1 on page 64.
• Check that the emergency stop button is reset.
CAUTION
Metal chips and other debris can damage the machine and degrade its
performance. Ensure all metal chips and other debris are removed from the
machine before and after each use.
F
IGURE
4-1. D
ETAIL OF HOSE GUIDE BRACKET