17
4.1.6.
Device
Click on the “
Device
” tab for Device settings where you can view device zone,
type, add or remove devices.
For learning new device(s), please use local learning mode or use the PC
Programming Tool.
Add Sensor:
Depends on the supplier, a Sensor ID of the device may be labeled (usually on
the back of the device). Users can use the “Add Sensor” function to include
sensors into the Base.
Click on the “
Add Sensor
” button:
Enter the Sensor ID (the barcode on the back of the sensor). A sensor ID
is a combination of digits 1-9 and characters A-F and can contain 10 or 14
characters (can be uppercase or lowercase characters).
If the sensor is successfully added, the sensor will be assigned from Zone
1 to 15 in sequence.
Removing sensors:
Click on the device entry you wish to delete from the Device List, and then
click the “
Delete Sensor
” button.