Climax BB5500, Руководство по эксплуатации

Страница: 16 / 64

Page 14 BB5500 Operating Manual
Inspect the Machine
To maximize the life of the machine, keep all components of the machine in clean, working
order. Make sure parts such as each mounting surface, the lead screw, hydraulic fittings, and
the tool bit itself are free of metal chips, nicks or burrs.
For detailed information about machine maintenance, see “Maintenance.”
Remove the Motor
Do not install the motor to the machine until you are ready to begin machining. The motor
mounted to the machine can make setup of the machine unnecessarily complicated.
To remove the motor
Undo the motor’s mounting bolts and slide it from the rotational drive assembly.
Remove the Lower Bearing Hanger and Boring Bar
Do the following to remove the lower bearing hanger and boring bar.
1. Loosen the clamp assembly.
2. Remove the lower bearing hanger assembly and the boring bar at the same time.