Climax BB5500, Руководство по эксплуатации

Страница: 42 / 64

Page 40 BB5500 Operating Manual
Maintenance
Maintenance Items
Follow the list below when maintaining your BB5500 Portable Boring Machine.

Mounting assembly: Inspect the dovetail ways, clean, lubricate, and carefully
remove any burrs.

Boring bars: Handle boring bars carefully to prevent damage. Inspect the taper
and carefully remove any burrs. For long-term storage, keep the bar in a vertical
position
CAUTION
Protruding setscrews will damage mating parts. Be sure the
setscrew holding the tool bit in place does not protrude
beyond the outer surface of the bar.

Axial feed box: Under normal conditions, the axial feed box is maintenance-free.

Hydraulic power unit: After each 72 hours of operation replace the filter
cartridge, check the heat exchanger for leaks, clean the filler/breather.

Hydraulic Motor: The hydraulic motor is maintenance-free. Fluid passing through
the motor lubricates the internal moving parts. To make sure long life and
dependable operation, use high-quality, clean hydraulic fluid.

Hydraulic Filter and Fluid: Periodic replacement of the filter and fluid is required
for proper operation. Initially, change the filter after 72 hours of operation to
remove any impurities in the system. Thereafter, replace every 150-200 hours.
Use only a high-quality filter. Climax recommends a 10-micron, industrial-grade
filter. If the system includes a change-warning gauge, change the filter as often
as indicated. Clean hydraulic fluid will help keep the power unit and motor
running properly.

Maintain proper fluid level. Do not allow the level to drop below the red line at
the bottom of the level/temperature gauge.

Maximum recommended oil operating temperature is 150
°
F (66
°
C).