Climax BB5500, Руководство по эксплуатации

Страница: 9 / 64

P/N 29327, Rev. 3 Page 7
Risk assessment checklist
Use these checklists as part of your on-site risk assessment and include any additional
considerations that may pertain to your specific application.
T
ABLE
1. R
ISK ASSESSMENT CHECKLIST BEFORE SET
-
UP
Before Set-up

I took note of all the warning labels on the machine.

I removed or mitigated all identified risks (such as tripping, cutting, crushing,
entanglement, shearing, or falling objects).

I considered the need for personnel safety guarding and installed any necessary
guards.

I read the Machine Assembly instructions and took inventory of all the items required
but not supplied.

I created a lift plan, including identifying the proper rigging, for each of the setup lifts
required during the setup of the support structure and machine.

I located the fall paths involved in lifting and rigging operations. I have taken
precautions to keep workers away from the identified fall path.

I considered how this machine operates and the best placement for the controls,
cabling, and the operator.

I evaluated and mitigated any other potential risks specific to my work area.
T
ABLE
2. R
ISK ASSESSMENT CHECKLIST AFTER SET
-
UP
After Set-up

I checked that the machine is safely installed and the potential fall path is clear. If the
machine is elevated, I checked that the machine is safeguarded against falling.

I identified all possible pinch points, such as those caused by rotating parts, and
informed the affected personnel.

I planned for containment of any chips or swarf produced by the machine.
I followed the Maintenance Intervals with the recommended lubricants.

I checked that all affected personnel have the recommended personal protective
equipment, as well as any equipment required by the site or other regulations.

I checked that all affected personnel understand the danger zone and are clear of it.

I evaluated and mitigated any other potential risks specific to my work area.