manualshive.com logo in svg

Climax BB4500, Руководство по эксплуатации

Поделиться
Скачать
Climax BB4500 Скачать руководство пользователя страница 19

P/N 92974, Rev. 1

Page 3

 

and interfaces that can cause severe impact, pinching, cutting, and other 
injuries. Except for stationary operating controls, avoid contact with mov-
ing parts by hands or tools during machine operation. Remove gloves and 
secure hair, clothing, jewelry, and pocket items to prevent them from 
becoming entangled in moving parts.

Sharp edges – 

Cutting tools and workpieces have sharp edges that can eas-

ily cut skin. Wear protective gloves and exercise caution when handling a 
cutting tool or workpiece.

Hot surfaces – 

During operation, motors, pumps, HPUs, and cutting tools 

can generate enough heat to cause severe burns. Pay attention to hot sur-
face labels, and avoid contact with bare skin until the machine has cooled.

1.4

M

ACHINE

-

SPECIFIC

 

SAFETY

 

PRECAUTIONS

Eye hazard – 

This machine produces metal chips during operation. Always 

wear eye protection when operating the machine.

Sound level – 

This machine produces potentially harmful sound levels. 

Hearing protection is required when operating this machine or working 
around it. During testing, the machine produced the sound levels

1

 listed in 

Table 1-1. 

Hazardous environments – 

Do not operate the machine in environments 

where potentially explosive materials, toxic chemicals, or radiation may be 
present.

Machine mounting – 

Do not operate the machine unless mounted to a 

workpiece in accordance with this manual. If mounting the machine in an 
overhead or vertical position, do not remove hoist rigging until the machine 
is mounted to the workpiece in accordance with this manual.

1. Machine sound testing was conducted in accordance with European Harmonized 
Standards EN ISO 3744:2010 and EN 11201:2010.

T

ABLE

 1-1. S

OUND

 

LEVELS

SBB4500 motor

BB5000 motor

Sound power

90.0 dBA

94.0 dBA

Operator sound pressure

91.4 dBA

91.4 dBA

Bystander sound pressure

89.6 dBA

89.6 dBA

Содержание BB4500



































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды