4
Adhesive Mounting
The door contact and the magnet can also be mounted using the double-sided adhesive tape pad.
To mount the Door Contact:
I. Open the top cover.
II. Clean the mounting location and back of the Door Contact with a suitable degreaser.
III. Remove the protective covering (Yellow side) of the double-sided adhesive pad. Apply to the back
of the Door Contact and press firmly for 30 seconds to ensure good contact.
IV. Remove the other protective covering (Red side) and firmly press the Door Contact onto the
desired location for 30 seconds.
V. Replace the top cover by sliding it to the right. Tighten the retaining screw. (See
Figure 1
above for
details)
To mount the Magnet:
I.
Clean the mounting location and back of the Magnet with a suitable degreaser.
II.
Remove the protective
covering (Yellow side) of the double-sided adhesive pad
d. Apply to the back of
the Magnet and press firmly for 30 seconds to ensure good contact.
III.
Remove the other
protective covering
(Red side) a
nd firmly press the Magnet onto the desired location for
30 seconds.
If
using the Magnet Spacer, attach the magnet to the spacer, tear off the
protective covering from the
other side of the spacer, and then firmly press onto the desired location for 30 seconds
Figure 2