REMOTE CONTROL
7
8
I/O BUTTON (ON/OFF)
Starts or Stops the Unit
MODE BUTTON
Selects the functions of the unit for:
a.
Auto Mode
b.
Air Conditioning Mode
c.
Dehumidifying Mode (Dry)
d.
Fan Mode
e.
Heating Mode
FAN BUTTON
a.
High
b.
Medium
c.
Low
d.
Auto
TEMPERATURE [+/-]
Select the desired temperature by pressing or – key when using the unit
in cooling, heating or Auto function. The LCD will display the desired temperature
during the setting. The LCD displays room temperature when it is not at tempera-
ture setting mode.
The LCD display either in Celsius or Fahrenheit. Press the tempe and –
keys simultaneously to change the display from Celsius to Fahrenheit and vice
versa.
HOUR/MIN
Use the Hour and Min buttons to set the clock and timer.
To set clock: Press and hold either Hour or Min button until the time at the bottom
hour or min key until the current time has been set. The clock will display as a
now set.
Pressing down the reset button for a few seconds then releasing it can also reset
the clock. The display will then reset and the clock can be set.
T-ON AND T-OFF (TIMER)
The T-On and T-Off buttons set the unit to turn on and off at a pre-determined time.
RESET BUTTON
Pressing and holding the reset button will return the remote to its default settings.
The clock will also be reset.
MODE & FAN OPERATION
AUTO MODE
Turn the unit on by pressing the I/O button on the remote control.
Press the Mode Button until the “AUTO” appears on the LCD display.
Select the fan speed by using FAN button.
During the AUTO model, the unit operates at heating mode when the room
temperature is below 68°F (20°C). It operates at dehumidifying mode when
the room temperature is between 68°F (20°C) and 80°F (27°C). It operates
at cooling mode when the room temperature is above 80°F (27°C).
The timer may be used with the AUTO mode.
COOL MODE
Turn on the unit by pressing the I/O Button on the remote control.
Press Mode Button until “Cool” appears on the LCD display
Press the + / - Temperature button until the desired room temperature appears
on the LCD. The temperature ranges from 61°F - 88°F (16°C - 31°C).
Select the fan speed by pressing the FAN Button.
setting the temperature at the lowest and the fan speed at the highest.
Reducing the length of the exhaust duct and insulating the exhaust duct
and keeping direct sunlight to a minimum will also improve the cooling
NOTE: If the air conditioner is off and is then turned on while set to a
Cool setting or if turned from a fan setting to a Cool setting, it may take
approximately 3 minutes for the compressor to start and cooling to begin.
