SPECIFICATIONS
INSTALLATION
5
6
Please refer to www.climaterightair.com for the installation guide.
REMOTE CONTROL
INSTALLING BATTERIES
To Insert the Batteries in the Remote Control:
1. Remove the battery cover by sliding it according to the arrow direction.
2. Insert two new AAA alkaline batteries, matching the (+) and (–) of the battery
to the orientation in the battery compartment.
3. Reattach the cover by sliding it back into position.
Notes:
• Remove the batteries f
rom the remote control if the system is not going to
be used for an extended period of time.
• This is an IR (Infra
red) remote and requires line of sight to control the unit
Make sure there are no obstructions between the remote and signal
receiver located on the display panel of the unit.
* Remote may vary slightly from the image above