Can I use ClimateRight INDOORS?
Not
recommended. We do not recommend you
set the ClimateRight inside your structure. We
recommend it sits outside and the 2-hose air
intake/outflow kit (included) is used. At the current,
time we cannot warrant ClimateRight for indoor
usage since a custom venting system for heat to
escape using cooling mode must be constructed
and installed. Consult your local HVAC company
or qualified carpenter with knowledge of HVAC
systems if you choose to do this.
What are the dimensions (diameters) of the
hoses?
: CR-2550 is 3.15 inches. CR-7000 is 4.7
inches. These hoses are sold separately as
Accessories.
How does ClimateRight actually heat and cool?
There are two ports located on the front of the
unit. On port #1, air is drawn into and sent to
the inside of the unit where it is either heated or
cooled. Then the air is forced by fan back out
port #2, into the structure to be climate controlled.
No heating elements or cooling elements
(evaporator) are exposed to the outside. Both
elements are contained within sealed cases
located on the inside of the unit. This unit is not
set up like a space heater and will not pose any
sort of fire hazard if tipped over. (See “Figure 1 –
ClimateRight Cooling/Heating Process”).
What is the temperature range for heating and
cooling?
ClimateRight can be set to heat or cool
from 61-87 degrees Fahrenheit. ClimateRight
can be set to heat mode, or cool mode. Or, set
it to adjust between heating and cooling mode
automatically to keep the temperature and
climate constant. Acclimatized temperatures
vary depending on ambient air temperature and
size of enclosure. Note: Do not use the CR-7000 in
outdoor temperatures below 36
o
.
IMPORTANT NOTE
: Let ClimateRight run for about
48 hours continuously for peak performance. Do
not expect ClimateRight to work in minutes, or
even a few hours. It may take this amount of time
to optimize your climate.
Can ClimateRight be left on continuously?
Yes.
You can use ClimateRight continuously to help
maintain temperature and humidity, or “spot”
heat or cool while within an enclosure for shorter
periods.
How much power does ClimateRight consume?
ClimateRight is considered very energy efficient
and inexpensive to operate. The power
consumption is as follows. Usually, it costs less than
$1/day depending on the price of electricity from
your power supplier.
CR-2550 = .2 kw/H.
CR-7000 = .5kw/H
What comes included with ClimateRight?
At
the current time, the unit comes with a kit that
contains two hoses, one hole saw, two couplers,
four clamps, one mesh filer for return hose, and
eight screws (optimal for dog and cat house cut
out and assembly). Instructions and Warranty are
also enclosed. This kit can be used for any other
wooden structure, such as an outdoor shed.
List of parts included in kit: 2 Hoses, 4 Clamps,
8 Screws, 1 Mesh Filter for return hose, 1 Hole Saw,
2 Couplers, Warranty card, Instruction Manual
Why is ClimateRight better for small spaces?
The
CR-2550 unit runs with a smaller compressor than
almost all bigger units on the market, and thus
is not “overkill” with too much cold or too much
hot. It optimizes the small climate space, with
the bonus of very little energy consumption. The
CR-7000 is a bit more capacity (BTU) and blow
force. Carefully select the unit based on size of
enclosure (see “What Types of Enclosures Work
with ClimateRight”).
Who makes ClimateRight?
We manufacture in
a state-of-the-art manufacturing facility in China
specializing in OEM electronic heating and cooling
products, supplying both small and very large
corporations. We use only first quality components
such as Toshiba and Hitachi compressors, and brass
piping.
Tacom Limited • Columbus, OH • www.ClimateRightAir.com • 800-7-CLIMATE
13
ClimateRight™ FAQ—, cont...
Models #CR-2550 and #CR-7000
