ClimaTemp Portables CPT-12 Скачать руководство пользователя страница 12

Страница: 12 / 18

OPERATION MANUAL

OPERATION (cont.)

•

When the “Tank Full” light illuminates, and an audible chirping sound can be
heard, the unit will cut off the power supply and stop.

•

Please open the drain tank door and pull out the drain
tank from the unit, remove the cap and empty

the drain tank.

• Carefully remove the water tank and do not

damage the top components on the top of water tank.

• Make sure the water tank is in correct position,

otherwise it may cause water to leak and damage

the unit and surroundings.

Note: The condensed water can be directly discharged through a gravity drain. Remove
the drain tank, connect the drain outlet directly to the machine through the bottom side
discharge hose or out through the right-side discharge hose outlet.

Optional Plug n Play Condensate Pumps are available for the CPT-12 spot cooler.

Please contact your ClimaTemp reseller for condensate pump options.

Содержание CPT-12



















Результаты поиска

Содержание CPT-12

Отзывы:

Бренды по названию

Популярные бренды

ClimaTemp Portables CPT-12, Руководство по эксплуатации

Результаты поиска

Содержание CPT-12

Отзывы:

Бренды по названию

Популярные бренды