ClimateMaster Tranquility 20 TSD 006 Series Скачать руководство пользователя страница 63

63

c l i m a t e m a s t e r. c o m

T H E   S M A R T   S O L U T I O N   F O R   E N E R G Y   E F F I C I E N C Y

Tr a n q u i l i t y

®

  2 0   ( T S )   S e r i e s

R e v. :   0 6 / 1 7 / 1 5

Warranty (International)

 

CLIMA

TE MASTER, INC.

 

LIMITED EXPRESS 

W

ARRANTY

 /LIMIT

A

TION OF

 REMEDIES 

AND LIABILITY

 

(FOR INTERNA

TIONAL

 CLASS PRODUCTS)

Disclaimer:  It is expressly understood that unless a statement is speci

fi cally 

identi

fi ed as a warranty

, statements made by Climate Master

, Inc., a Delaware corporation, U. S. 

A. (“CM”) or its representatives, rel

ating to CM’

s products, whether oral, writ-

ten or contained in any sales literature, catalog, this or any other agreement or other materials, are not express warranties a

nd do not form a part of the basis of the bar

gain, but are merely CM’

s opinion or commendation of CM’

s products. 

EXCEPT

 AS 

SPECIFICALL

Y

 SET

 FOR

TH HEREIN 

AND 

T

O

 THE FULLEST

 EXTENT

 PERMITTED BY

 APPLICABLE LA

W
, CM MAKES NO 

W

ARRANTY

 AS 

T

O

 ANY

 OF

 CM’S PRO

DUCTS, 

AND CM MAKES NO 

W

ARRANTY

 AGAINST

 

LA
TENT

 DEFECTS OR 

ANY

 W

ARRANTY

 OF

 MERCHANT

ABILITY

 OF

 THE GOODS OR OF

 THE FITNESS OF

 THE GOODS FOR 

ANY

 P

A

R

TICULAR PURPOSE.

GRANT

 OF

 LIMITED EXPRESS 

W

ARRANTY

CM warrants CM products purchased and installed outside the United States of 

America (“U.S.A.”) and Canada to be free from mate

rial defects in materials and workmanship under normal use and maintenance as follows: (1) 

All complete air 

conditioning, heating or heat pump units built or sold by CM for twelve (12) months from date of unit start-up or eighteen (18)

 months from date of shipment (from CM’

s factory), whichever comes 

fi rst; and, (2) Repair and replacement parts, which are 

not supplied under warranty

, for ninety (90) days from date of shipment (from factory).

W

arranty parts shall be furnished by CM if ordered through an authorized sales representative of CM (“Representative”) within s

ixty (60) days after the failure of the part. If CM determines that a parts order quali

fi es for replacement under CM’

warranty

, such parts shall be shipped freight prepaid to the Representative or the ultimate user

, as requested by Representativ

e.  
All duties, taxes and other fees shall be paid by the ultimate user through the Representative. 

If requested by CM, all defective parts shall be returned to CM’

s factory in Oklahoma City

, Oklahoma, U.S.A, freight and duty p

repaid, not later than sixty (60) days after the date of the request. If the defective part is not timely returned or if CM 

determines the part to not be defective or otherwise not to qualify under CM’

s Limited Express 

W

arranty

, CM shall invoice Custo

mer the costs for the parts furnished, including freight. 

The warranty on any part repaired or replaced under warranty 

expires at the end of the original warranty period.

This warranty does not cover and does not apply to: (1) 

Air 

fi lters, fuses, refrigerant, 

fl uids, oil; (2) Products relocated after initial installation; (3) 

Any portion or component of any system that is not supplied 

by CM, regardless of the cause of the failure 

of such portion or component; (4) Products on which the unit identi

fi cation tags or labels have been removed or defaced; (5) Products on which payment by Customer to CM or its distributors or Rep

resentatives, or the Customer

’s

 seller is in default; 

(6) Products which have defects or damage which result from improper installation, wiring, electrical imbalance characteristics

 or maintenance; or from parts or components manufactured by others; or are caused by accident, misuse, negligence, abuse, 

fi re, 

fl ood, lightning, alteration or misapplication of the product; (7) Products which have defects or damage which result from a con

taminated or corrosive air or liquid supply

, operation at abnormal temperatures or 

fl ow rates, or unauthorized opening 

of the refrigerant circuit; (8) Mold, fungus or bacteria damages; (9) Products subjected to corrosion or abrasion; (10) Product

s, parts or components  manufactured or supplied by others; (1

1) Products which have been subjected to misuse, negligence 

or accidents; (12) Products which have been operated in a manner contrary to CM’

s printed instructions; (13) Products which hav

e defects, damage or insuf

fi cient performance as a result of insuf

fi cient or incorrect system design or the improper 

application, installation, or use of CM’

s products; or (14) Electricity or fuel costs, or any increases or unrealized savings i

n same, for any reason.

CM is not responsible for: (1) 

The cost of any 

fl uids, refrigerant or other system components, or the associated labor to repair or replace the same, which is incurred as a re

sult of a defective part covered by CM’

s Limited Express 

W

arranty; (2) 

The cost 

of labor

, refrigerant, materials or service incurred in diagnosis and removal of the defective part, or in obtaining and replac

ing the new or repaired part; (3) 

T

ransportation costs of the defective part from the installation site to CM or of the return 

of any 

part not covered by CM’

s Limited Express 

W

arranty; or (4) 

The costs of normal maintenance.

Limitation: 

This Limited Express 

W

arranty is given in lieu of all other warranties. If, notwithstanding the disclaimers contain

ed herein, it is determined by a court or other quali

fi ed judicial body that other warranties exist, any such warranty

, including 

without limitation any express warranty or any implied warranty of 

fi tness for particular purpose and merchantability

, shall be limited to the duration of the Limited Express 

W

arranty

This Limit

ed Express 

W

arranty does not exclude any warranty that is 

mandatory and that may not be excluded under applicable imperative law

.

LIMIT

A

TION OF

 REMEDIES

In the event of a breach of this Limited Express 

W

arranty or any warranty that is mandatory under applicable imperative law

, CM

 will only be obligated at CM’

s option to either repair the failed part or unit or to furnish a new or rebuilt part or unit in 

ex-

change for the part or unit which has failed. If after written notice to CM’

s factory in Oklahoma City

, Oklahoma, U.S.A. of eac

h defect, malfunction or other failure and a reasonable number of attempts by CM to correct the defect, malfunction or other 

failure and the remedy fails of its essential purpose, CM shall refund the purchase price paid to CM in exchange for the return

 of the sold good(s). Said refund shall be the maximum liability of CM. 

T

O

 THE FULLEST

 EXTENT

 PERMITTED BY

 

APPLICABLE LA

W
, THIS REMEDY

 IS 

THE SOLE 

AND EXCLUSIVE REMEDY

 OF

 THE CUST

OMER 

AGAINST

 CM FOR BREACH OF

 CONTRACT

, FOR 

THE BREACH 

OF

 ANY

 W

ARRANTY

 OR FOR CM’S NEGLIGENCE 

OR IN STRICT

 LIABILITY

.

LIMIT

A

TION OF

 LIABILITY

CM shall have no liability for any damages if CM’

s performance is delayed for any reason or is prevented to any extent by any e

vent such as, but not limited to: any war

, civil unrest, government restrictions or restraints, strikes, or work stoppages, 

fi re, 

fl ood, accident, allocation, shortages of transportation, fuel, materials, or labor

, acts of God or any other reason beyond the 

sole control of CM. 

T

O

 THE FULLEST

 EXTENT

 PERMITTED BY

 APPLICABLE LA

W
 AND SUBJECT

 T

O

 

THE NEXT

 SENTENCE, CM EXPRESSL

Y

 DISCLAIMS 

AND EXCLUDES 

ANY

 LIABILITY

 FOR LOSS OF

 PROFITS, LOSS OF

 BUSINESS OR GOODWILL, CONSEQU

ENTIAL, INCIDENT

AL, SPECIAL, LIQUIDA

TED, OR 

PUNITIVE DAMAGE IN CONTRACT

, FOR BREACH OF

 ANY

 EXPRESS OR IMPLIED 

W

ARRANTY

, OR IN 

T

O

R

T

WHETHER FOR CM’

s NEGLIGENCE OR 

AS STRIC

T

 LIABILITY

. Nothing in this 

Agreement is intended to 

exclude CM’

s liability for death, personal injury or fraud.

OBT

AINING W

ARRANTY

 PERFORMANCE

Normally

, the contractor or service or

ganization who installed the products will provide warranty performance for the owner

. Sh

ould the installer be unavailable, contact any CM recognized Representative. If assistance is required in obtaining warranty 

performance, write or call:

Climate Master

, Inc.  •  Customer Service  •  7300 S.W

. 44th Street  •  Oklahoma City

, Oklahoma, U.S.A. 73179  •  (405) 745-600

0  •  F

AX (405) 745-6068

NOTE: Some countries do not allow limitations on how long an implied warranty lasts, or the limitation or exclusions of consequ

ential or incidental damages, so the foregoing exclusions and limitations may not apply to you. 

This warranty gives you 

speci

fi c legal rights, and you may also have other rights which vary from state to state and country to country

.

Please refer to the CM Installation, Operation and Maintenance Manual for operating and maintenance instructions.

*LC079*

LC079

Rev

.: 10/09

Содержание Tranquility 20 TSD 006 Series

































































Отзывы: