Climate Control CCS-22HR4GP, Руководство пользователя

Страница: 11 / 25

9
ƾ
ƾ
ƾ
ƽ
ƽ
ƽ
ƽ
ƽ
ƽ
Operation of wireless remote control
About the Super Strong function
When the Super Strong function is turned on, the whole unit runs at the high fan speed, and runs at the
Quick COOL or Quick HEAT operation, to make the ambient temperature swiftly approach to the setting
temperature. Turn off the Super Strong function, the whole unit runs at the setting fan speed.
About LOCK
To press + and - button, can lock or unlock the keyboard, after locked, the symbol of the lock will be displayed
at this time, to press any key, the symbol will flash for 3 times. After it is unlocked, the symbol will disappear.
Changing batteries and notices
Slightly to press the place with , along the arrowhead direction to push the back cover of wireless remote
control. (As show in figure)
Take out the old batteries. (As show in figure)
Insert two new AAA1.5V dry batteries, and pay attention to the polarity.
(As show in figure)
Attach the back cover of wireless remote control. (As show in figure)
When changing the batteries, do not use the old or different batteries,
If the wireless remote control will not be used for a long time, please
otherwise, it can cause the malfunction of the wireless remote control.
take them out, and don't let the leakage liquid damage the wireless
remote control.
The operation should be in its receiving range.
It should be placed at where is 1m away from the TV set or stereo sound sets.
If the wireless remote control cannot operate normally, please take them out,
after 30s later and reinsert, if they cannot normally run, please change them.
When it is need to control the main unit, please aim at the receiving device, in order to improve the sensitivity
Sketch map for changing batteries
NOTE:
of the main unit. When the wireless remote control is sending information, the symbol will flash 1s. The
main unit is receiving the information, will send a sound.
ƽ
ƽ
Emergency running
When the wireless remote control is lost or damaged, please use
the manual switch, at this time, it is running in Auto Run mode,
that will not change the temperature setting value and fan speed.
At operation: When the unit stopped running, press ON/OFF button,
unit will enter into AUTO RUN mode. The microcomputer will
accord to the room temperature to select the (COOL, HEAT, FAN)
mode automatically, to obtain the comfortable effect.
work.
At stopping: When the unit is running, press the ON/OFF button of the manual switch, the unit will stop
Auto/ Stop
Manual switch