Climate Control CCS-22HR4GP, Руководство пользователя

Страница: 10 / 25

ƾ
ƾ
Operation of wireless remote control
Guide for operation- general operation
1. After powered on, press ON/OFF button, the unit will start to run.(Note: When
it is powered on, the guide louver of main unit will close automatically.)
2. Press MODE button, select desired running mode, or press COOL or HEAT
mode to enter into the corresponding operation directly.
3. Pror - button, to set the desired temperature (It is unnecessary
to set the temp. at AUTO mode.)
4. Pressing FAN button, set fan speed, can select AUTO FAN, LOW, MID
and HIGH.
5. Pressing SWING button, to select the swing.
Guide for operation- Optional operation
1. Press SLEEP button, to set sleep.
2. Press TIMER, +and- button, can set the scheduled timer on or timer off.
3. Press LIGHT button, to control the on and off of the displaying part of the
unit (This function may be not available for some units).
4. Press TURBO button, can realize the ON and OFF of TURBO function.
The above operation please refers to Page 8, Page 9 for details.
Introduction for special functions
About AUTO mode
When AUTO mode is selected, the setting temperature will not be displayed on the LCD of the wireless
remote control, according to the indoor temperature, unit will automatically select the appropriate running
mode, to make the environment comfortably, without the user to operate.
About DRY Function
The DRY function is used for after the unit turned off, to dry the moisture on the evaporator of indoor unit,
in order to prevent the moldy.
1. The DRY ON has been set up: At this time, press ON/OFF button, the whole unit will be turned off, but the
indoor fan motor still run at low fan speed for a while and then stop. During this course, repress the
BLOW button, can stop the indoor fan motor directly.
2. The DRY OFF has been set up: At this time, press ON/OFF button, the whole unit will directly turn off.