EVAPORATIVE CM-6000A
www.climateplus.ae
Inspection and preparation before assembling
1) Please open the side panel to check the parts and the technical parameters (the manual), if the
parts are incomplete or breakage, Leave it as it is and inform us or the distributor.
2) Check if the supply voltage is same as the rated one. Make the phase voltage is 2020+/ 10V
3) Make sure the water is clean.
Guide for installation and uninstall of truckles and horse
1) Take two sets of assembled frame as Pic1
2) Use ST5x25 bolts to stable the assembled frame to the bottom of the water tank. And lock the
bolt closely with Philipp’s screwdriver. Please pay attention to the hole at the tank while installing
as Pic 2.
Guide for installation and uninstall of side panel
1) Lose 8 bolts with screwdriver as pic. 3
2) Pull up 2 pieces of dust screens and the side panel, then pull out the side panel and take t
out, as Pic 4.
3) Please install as the contrary step as above.
02
