— Remote Controlled Features
(cont.)
—
✔
A Pair of Remotely Adjustable Dual-Zone Sensors
— The most common
cause of recurring false alarms is an improperly adjusted sensor. What’s
more, a sensor may require re-adjustment when conditions have changed, for
instance when leaving your car in a vibration-prone multi-story parking
structure. With Clifford’s innovative remote sensor adjustment, you can
adjust the sensor sensitivity setting any place, any time, without any tools and
from up to 50 feet away. You can adjust sensitivity up or down by up to 32
increments merely by pressing buttons on your remote control.
n
Digital Dual-Zone Proximity Sensor IV™
— The two sensor zones provide full
perimeter protection: If someone is lurking near your car, the system sounds a
one-second warning tone, but if a thief leans into the passenger compartment
through an open window, the system instantly blasts the siren, flashes the parking
lights and immobilizes the starter and ignition system. You can adjust, test and set
sensitivity of each zone of this efficient microprocessor-controlled passenger
compartment sensor via a few presses on the remote control. To minimize current
draw, this new-generation radar sensor uses only 30% of the power required by
other radar sensors, yet provides better sensitivity and far more precise
discrimination between genuine threats to your vehicle and everyday
environmental conditions that cause other radar sensors to false alarm.
n
Dual-Zone Piezo Sensor™
— Just like the Digital Dual-Zone Proximity Sensor IV,
you can adjust and test sensitivity of each zone of this all-electronic
vibration/impact sensor via the remote. Unlike other vibration/impact sensors, the
sensitivity of the Dual-Zone Piezo Sensor stays where you set it regardless of time
or temperature. The warning zone of the Dual-Zone Piezo Sensor has a different
sound than that of the Dual-Zone Proximity Sensor for distinct identification.
n
Tonal Confirmation of Remote Sensor Adjustments
— For the utmost in sensitivity
adjustment ease and instant feedback, just press a few buttons on the remote to
adjust the sensitivity of each zone of each of the two system sensors. That’s all
there is to it! Higher and higher pitched tones confirm each sensitivity increase,
lower and lower tones confirm each decrease.
n
Remote Override of Each Proximity Sensor Zone
— One press of a button on the
remote control overrides the Proximity Sensor IV’s perimeter warning zone when
you need to park in an area with heavy pedestrian traffic. A second press turns off
both zones for those times when you must leave a passenger or pet in the vehicle.
✔
Remote Window/Sunroof Closure Capability
— If your vehicle can close the
power windows/sunroof via the driver’s door key (including several models
of Mercedes Benz, BMW, Volkswagen and Jaguar), the system’s integrated
timer and an optional relay can be used to automatically close the power
windows and sunroof every time you arm the system with your remote control.
7
