Table of user-selectable features: 1 chirp = OFF, two chirps = ON.
Feature Select
Column 1
1st latched
Column 2
2nd latched
Column 3
3rd latched
Column 4
4th latched
Column 5
5th latched
Row 1
1st momentary
Sound 1: on/off
info on page 20
Add new remote to channel 1
info on page 12 NOTE 1
AutoLock on/off
info on page 16
Enhanced AutoArming: on/off
info on page 15
NightVision on/off
info on page 18
Row 2
2nd momentary
Sound 2: on/off
info on page 20
Add new remote to channel 2
info on page 12 NOTE 2
RPM-activated AutoLock on/off
info on page 16
AutoArm & Lock: on/off
info on page 15
Post-parking headlight duration
1sec -2min
(30sec)
info on page 12 and 18 NOTE 8
Row 3
3rd momentary
Sound 3: on/off
info on page 20
Add new remote to channel 3
info on page 12 NOTE 3
AutoUnLock on/off
info on page 16
15-second entry delay: on/off
info on page 15
FACT: on/off
info on page 16
Row 4
4th momentary
Sound 4: on/off
info on page 20
Add new remote to channel 4
info on page 12 NOTE 4
QuietChirps: on/off
info on page 20
AutoActivate timed accessory
upon remote arming: on/off
this feature is for installers only
✱
Set channel 4 and 5 timer
1sec -2min
(30sec)
info on page 12 NOTE 9
Row 5
5th momentary
Sound 5: on/off
info on page 20
Add new remote to channel 5
info on page 12 NOTE 5
SilentNight: on/off
info on page 20
Siren duration: 60/30 seconds
(1/2 chirps) info on page 20
Anti-carjacking: on/off
info on pages 9-10
Row 6
6th momentary
Sound 6: on/off
info on page 20
Erase all channels
info on page 23 NOTE 6
Long-term
chirp silencing: on/off
info on page 20
Set a new secret
disarming/valet code
info on page 10 NOTE 7
Remote control button sequence
to override anti-carjacking
info on page 10 NOTE 10
✱
WARNING:
If you have remote window and sunroof closure, DO NOT CHANGE THIS SETTING: it requires installer-only adjustment. Changing the duration may cause damage.
Please Note: There is a column 6 that contains installer-only features; do not change any of these settings. If you accidentally select column 6, turn off the ignition.
NOTE 1:
Transmit channel 1 (or other channel of your choosing) of the new
remote control. You will hear one chirp to confirm programming of channel 1.
NOTE 2:
Transmit channel 2 (or other channel of your choosing) of the new
remote control. You will hear two chirps to confirm programming of channel 2.
NOTE 3:
Transmit channel 3 (or other channel of your choosing) of the new
remote control. You will hear three chirps to confirm programming of channel
3.
NOTE 4:
Transmit channel 4 (or other channel of your choosing) of the new
remote control. You will hear four chirps to confirm programming of channel 4.
NOTE 5:
Transmit channel 5 (or other channel of your choosing) of the new
remote control. You will hear five chirps to confirm programming of channel 5.
NOTE 6:
When you hear one chirp, all remotes will have been erased from the
system memory. You must now add the new and/or existing remote controls to
the system (i.e., program channels 1–5 of each remote that will be used with
your IntelliGuard 900IQ).
NOTE 7:
Immediately flip the switch to its latched position, then:
a. Enter the new code that you wish to use. The system will sound the same
number of chirps as the digit you choose when you move the switch to the
latched side (e.g., if the first digit is 4, you’ll hear four chirps when you press
the latched side).
b. Make sure to return the switch to its center position when complete.
c. Wait 3 seconds until you hear 2 chirps, indicating the new code has been
accepted.
d. Turn the ignition off. You’ll hear 3 chirps to confirm program mode exit and
the LED will turn off.
e. VERY IMPORTANT: You must immediately test your new secret
disarming/valet code: Turn the ignition on, enter your new code, then flip the
switch to its latched position. The LED will illuminate. If it does not, the new
code you programmed and the one you just entered do not match. The system
has reverted to the previous code.
NOTE 8:
The headlight duration timer starts as soon as you select this feature.
When the duration you wish has been reached, press button 1 on the remote
control. You will hear two chirps to confirm the new duration.
24
25
© Copyright Clifford Electronics, Inc., 1994 31-713A/IG9OM/494
