background image

To enable valet mode

1. Turn the ignition switch to its “ON” position or start the engine.
2. Enter your secret disarming code (as noted on page 9) on the PlainView switch, then

return the switch to its center position.

3. You now have 5 seconds to press latched position to enter valet mode. The system’s

LED will glow continually for on-going visual confirmation of valet mode.

To exit valet mode

1. Turn the ignition switch to its “ON” position or start the engine (you may also

perform the following while driving).

2. Flick the switch back to its center position. The LED will turn off to confirm that the

system is now in its normal operating mode.

Remote controlled valet mode entry and exit

You can even enable or exit valet mode with your remote control simply by transmitting
channel 9 (LevelShift twice, then button 1). In addition to the above indications, two
parking light flashes will confirm that you have remotely enabled valet mode, while a
single flash confirms exiting of valet mode.

Keyless entry in valet mode

Even if valet mode is enabled, you can still remotely control the convenience features.
For instance, simply press button 1 (channel 1) as if you were disarming and the doors
will unlock (indicated by one parking light flash) and the interior lights will turn on. Press
button 1 again and the doors will lock (confirmed by two flashes). You may also use the
other channels to activate options such as a remote trunk release or remote engine starting.

FACT™— False Alarm Control and Test 

With FACT, you’ll never experience repeated false alarms. If the MultiSound Medallion
Siren goes off, DO NOT remotely disarm the system; allow it to run for the full siren
duration. Before sounding the siren a second time, the system automatically checks for
another activated trigger to verify that an intrusion is in progress. Should the siren sound
again, you will know for sure that someone is tampering with your vehicle. (To disable
FACT, see User-selectable features on pages 21-25.)

AutoLock and AutoUnLock™

For your safety and that of your passengers, the doors automatically lock after you begin
driving (when you first reach 15-20mph). If you prefer, you may set AutoLock to lock the
doors the instant you turn on the ignition (see User-selectable features on pages 21-25).
When you turn the ignition off, AutoUnLock automatically unlocks the doors. To suit your
preferences, you may turn off either or both the AutoLock and/or AutoUnLock features.
There are four possibilities: AutoLock “on” while AutoUnLock is “off”, or vice-versa.
The other two combinations are both AutoLock and AutoUnLock “on” or both “off.”

16

Содержание intelliguard 900-IQ


























Отзывы: