Tamper-proof ignition immobilization output
If your IntelliGuard 800-IQ is equipped with the ignition immobilization option, while
armed, the system assures that your vehicle is completely immobilized by automatically
locking out the ignition system. That means that a thief won’t be able to start the engine
even if he had a duplicate of your car key. What’s more, even if he were to find the
system control unit and tear it out of your vehicle, he still would not be able to start your
car’s engine! That’s Clifford security you can count on.
AutoLock and AutoUnLock™
For your safety and that of your passengers, the doors automatically lock when you turn
on the ignition to start the engine, and unlock when you turn the ignition off. To suit your
preferences, you may turn off either or both the AutoLock and/or AutoUnLock features.
There are four possibilities: AutoLock “on” while AutoUnLock is “off”, or vice-versa.
The other two combinations are both AutoLock and AutoUnLock “on” or both “off.”
High-output MultiSound Medallion™ Siren
All the siren electronics are in the system control unit rather than the siren itself. This
protects them from heat, dirt and exposure to the elements (other alarm companies’
sirens are far more susceptible to failure). Your IntelliGuard 800-IQ also provides these
additional features:
Personalized Siren Sounds:
Most alarm sirens have a single “warble” tone. A few
offer “six-tone” sirens that either cannot be adjusted or require the physical destruction
of certain circuit wires in order to change the sounds (the change is permanent and
cannot be changed again). Your MultiSound Medallion Siren is different. As shipped
from the factory, the siren sounds six different alarm sound patterns. However, you
may turn any of the six alarm sounds on or off to create a different combination of
sound patterns. In all, there are 64 different combinations you may select. If you set your
own Personalized Siren Sounds and later hear a siren at a distance, you will know for
sure whether it is your car or someone else’s. See User-selectable features on pages 20-24.
QuietChirps™:
You can control the volume of the normal arm and disarm chirps. As
shipped from the factory, your system issues full-volume chirp acknowledgments. If
you prefer, you may reduce the chirp volume to a level that is clearly audible, yet less
obtrusive. See the User-selectable features section on pages 20-24.
Long-term chirp silencing:
Whenever you wish, you may silence your IntelliGuard
800-IQ’s arm and disarm chirps until you decide to restore them. The parking light
flashes will continue to provide visual confirmation of remote controlled arming and
disarming. See User-selectable features on pages 20-24.
Remote controlled chirp muting:
Remote controlled chirp muting capabilities are
especially valuable when parking late at night in a quiet residential area or any other
time when you want to arm or disarm silently. To arm or disarm silently, simply press
button 3 (channel 3) on your remote control instead of the usual button 1 (channel 1).
Siren duration:
When the system detects an intrusion attempt, the alarm is set to sound
for 30 seconds. However, if you prefer, you may change it to 60 seconds. See the
User-selectable features section on pages 20-24.
18
