TO ACTIVATE
THE PANIC
FEATURE . . . . . . . . . .
Press button 1 for 3 seconds. The lights will flash repeatedly and
the siren will blare for 30 or 60 seconds (user-selectable), or until
you press button 1 again to turn it off. If the ignition is on (indicating
you are in the car), the doors will automatically lock to prevent
an assailant from entering. If the ignition is off, the doors will
unlock, allowing you to enter without fumbling with your keys.
TO REMOTELY
TURN ON THE
HEADLIGHTS
(OR OTHER
TIMED OPTION) . . . .
Button 2 (channel 2) controls an electronic interlock that lets you
separately command two options with the same channel: one when
the system is armed and another when disarmed. Pressing button 2
while the alarm is armed will optionally turn on the headlights for
any duration you wish between one second and two minutes (factory
setting is 30 seconds; see User-selectable features on pages 20-24).
TO REMOTELY
OPEN THE
TRUNK RELEASE . . . .
Button 2 (channel 2) can control another option when the system
is disarmed, such as an optional remote trunk release. Pressing
button 2 while the alarm is disarmed will remotely open the trunk.
TO ACTIVATE
OTHER OPTIONS
REGARDLESS OF
ALARM STATE . . . . . . .
Button 4 (channel 4) and channels 5–8 (see How to use your
keychain remote control on page 8) can activate accessories such
as the IntelliStart remote engine starter, remote power window
control, electric garage door and entry gate opener(s),
IntelliGuard IQ systems on your other vehicles, etc.
What about
channels 9 – 12? . . . .
Channels 9 through 12 control remote valet mode entry/exit (see
page 14) , remote override of one or both zones of the system’s
Proximity Sensor (see page 15), and remote adjustment of each of
the two Proximity Sensor zones (see page 15).
How to interpret the chirps and parking light flashes
When you use the remote control, the system responds with chirps (unless the chirp muting
feature is turned on) and parking light flashes. These chirp/flash acknowledgments mean:
Chirps and flashes
Meaning
1
Your system is disarmed or you have remotely exited valet mode (see page 14)
2
Your system is armed or you have remotely engaged valet mode (see page 14)
2 and then 4
Armed but there is a door open (if there was a 5-sec. delay) or the sensor is
malfunctioning (if there was a 10-sec. delay) (see Smart AutoTesting on page 16)
3
Disarmed but there was an intrusion attempt while you were away
(see Smart prior intrusion attempt on page 17)
4
Armed but the hood or trunk is ajar (see Smart AutoTesting on page 16),
or confirms sensor zone override
(see Remote controlled override of one or both sensor zones on page 15)
11
