background image

Standard Features of the Falcon II 

(cont.)

User-Selectable AutoArming

— Automatically arms itself “passively” if

you forget to arm it with the remote control.

AutoArming Enable/Disable

— Enable or disable the AutoArming feature with

just a few flicks of a switch.

AutoArm & Lock

— If you wish, you may set the system to automatically lock

the doors every time it AutoArms.

Instant AutoArm Bypass

— Just two quick turns of the ignition switch will

bypass the AutoArming feature for one cycle — perfect when fueling the
vehicle. The AutoArming feature is automatically restored the next time you
start the engine.

Smart Remote Boot Release Capability

 — An electronic interlock assures

that the optional remote boot release can be activated only when the
system is disarmed. To further prevent any possibility of unintentional
opening of the boot, the interlock also makes sure that the boot release
cannot be remotely activated while driving.

Patented Remote Control Code Learning with MultiRemote Recognition

 —

Just a few flicks of a switch lets you match to the system up to 4 different
12-channel Premier or ACG Clifford remote controls. Just as easily, a lost
or stolen remote control can be deleted from the system memory.

Multiple-Car Control

— You can interface your Falcon II remote controls

with Falcon II systems on your other vehicles.

Control Unit with 4 Channels

— For remote controlled system operation

and remote control of optional accessories.

Bonnet/Boot Trigger Input

— For full perimeter protection of the engine

compartment and boot contents (may require optional pin switches).

High-Luminescence LED Status Indicator

 — Adds visual deterrence and

identifies system status.

Patented SmartPowerUp II

 — When power to the system is disconnected,

the system’s non-volatile memory always remembers the last state
(armed, disarmed or valet mode) and returns to that state when power is
restored. So if a thief disconnects the power and then restores it in an
attempt to start the car, the system will re-arm and instantly sound the
siren while immobilising the vehicle.

5

Содержание Falcon 2

















Отзывы: