www.directed.com
36
auto-immobilization feature
Immobilizer circuits automatically activate after 30 seconds.
N
NO
OTTEE:: H1/17 orange ground when armed will not activate during Auto-
Immobilization
auto-immobilization sequence
1.
Turn ignition off or disarm alarm
2.
After 30 seconds the systems Immobilization circuits activate and engage the
starter and ignition interrupt
3.
LED blinks at ½ normal speeds.
Disarm the system when immobilized
Use one of the following methods to turn off auto-immobilization
z
Turn ignition on and press the arm/disarm button of the transmitter.
z
Arm the alarm and then disarm the alarm.
z
Turn the ignition on and enter the system valet/PIN code.
one-time valet feature
This feature allows the system to be put in valet mode only until the next time the
ignition is turned off.
ON: Valet mode will be exited every time the ignition is turned on.
OFF: Valet mode will only be exited by using the valet switch or the remote control
second unlock feature
ON: System will monitor disarm channel for 10 seconds after disarm, if disarm chan-
nel is again transmitted within 10 seconds, H2/12 Blue/white will generate the
programmed unlock output.
OFF: H2/12 Blue/white wire will generate the programmed unlock pulse at the same
time as first unlock.
