6.
Feature change - Press the arm/disarm button on the transmitter. If the system
chirps once, the feature has just turned off; if the system chips twice, the feature
has just turned on. If the feature has more than two settings, continue pressing
the arm/disarm button on the transmitter to toggle through the settings.
To advance to the next feature in the same column, press
the same number
of times as the desired feature within 60 seconds; to change a feature in a
different column begin at step 4 by entering the column number first and then
the row number.
N
NO
OTTEE:: Refer to the Feature Descriptions sections of this guide for important notes and
descriptions of the system features and programming.
7.
Exit programming - To exit programming mode turn the ignition off or wait 60
seconds without pressing the PlainView 2 Valet switch. The siren will chirp three
times to indicate programming mode has been exited.
user selectable features
*
This feature is only available with optional IntelliStart connected.
**
This feature is only available with optional SmartWindows connected.
First
Press
Then
Press
Add new remote
(autolearn)
Set PIN code
(default = 2)
New remote learn
arm/disarm only
Auto (passive)
arm on/
off
Select siren
sounds
New remote learn
accessory A channel
Chirps
on/off/
quiet
FACT II
on
/off
New remote learn
accessory B channel
Auto lock
ignition
/off/rpm
Remote valet
on
/off
New remote learn
silent mode
Auto unlock
ignition
/off
Entry delay
on/
off
New remote learn
remote valet
Auto (passive)
arm and lock
on/
off
Reset to default
(except transmitter
and valet code)
New remote learn
remote start*
Siren duration
30
/60/90
Panic
on
/off
New remote learn
window down/vent**
Second unlock
on
/off
Autostart setting*
(
off
/battery only/
temp only/
battery and temp)
Not Used
Not used
Not Used
Clear all remotes
© 2003 directed electronics, inc.
23
