37
© 2009 Directed Electronics. All rights reserved.
can be performed by pressing one of the command buttons.
Programming
To enter;
hold
the
button for 8 seconds until the transmit LED turns on,
the programming main menu has been accessed (If programmed to
operate two systems, ignore the transmit LED flashes at 3 seconds).
To exit;
press
and
release
the
button to go back and repeat to exit.
The transmit LED turns off when programming is exited.
Sensor Adjust
The
button is used for sensor adjustment, to avoid unintended
alarm triggers, it is recommended that an authorized Directed
dealer perform all sensor adjustments.
Remote Features Menu
Press
and
release
the
button, 2 transmit LED flashes indicate
the remote features menu is accessed and can be set.
Press
the
buttons indicated below, 1 flash turns the feature on, 2 flashes
turns the feature off.
Autolock feature: Press
s
to turn on/off.
Car 2 feature: Press
s
to turn on/off.
Remote Learning
Press
the
button,3 transmit LED flashes indicates the remote is
ready to program to the system.
Per the instruction in
Pair
the Responder LC remote control
under
the
Main Menu
section of this guide, following step 3 of
Prepare
the system
.
Press
and
hold
the
button, the siren emits one
long chirp to confirm the remote has been learned.
