clic MONITOR CCM WIFI, Руководство пользователя

Страница: 6 / 24

6
CcM WiFi Manual 2021
3.3 TRANSPORT DAMAGE CHECK
Immediately after receiving the package, make
sure that the packaging as well as the device have
no signs of damage. At the same time, check that
the order is complete, having in mind the contents
of the box defined in section 1.1. If the packaging
shows any sign of damage, impact or tear, damage
of the system modules themselves should be
suspected and they should not be installed. If this
occurs, please contact Monsol Electronic’s customer
service.
Telephone: +34 952 02 05 80
E-mail: info@ clicmonitor.com
Web: clicmonitor.com
Address:
enerclic
Calle Elena Soriano, 7
CP: 29006 – Málaga,
Spain
3.4 STAFF
This system should be installed, handled and
replaced solely by qualified staff. The final user of
this manual is staff who is capable of handling the
devices.
Qualification of the staff mentioned herein must
meet all the safety-related standards, regulations
and legislation applicable to the installation and
operation of this system in the country concerned.
3.5 SPECIAL HAZARDS
The devices are designed to form a part of an
industrial or domestic electrical installation.
Corresponding safety measures must be observed.
Additional safety requirements should be specified
by the company who has installed or configured
the system.
3.6 INSTALLATION PLACE
The devices within the CcM family should be
installed in watertight enclosures that comply with
IP65 standards outdoors and IP55 standards indoors
to be protected from corrosion and humidity.
3.7 ALTERATIONS
It is strictly prohibited to carry out any
kind of alterations or modifications to
the system.
3.8 CLEANING AND MAINTENANCE
Cleaning and maintenance works should only be
carried out when the devices are disconnected
from the grid. Before taking any action, make sure
that the system has been correctly disconnected,
preventing the current to go through them,
generally deactivating the circuit breaker where the
device is connected.
The responsibility to select qualified
staff always lies with the company
that the staff works for. It is also the
responsibility of the company to assess
the ability of the worker to carry out any
kind of work and ensure their safety.
At the same time, staff must comply
with workplace health and safety
regulations. It is the responsibility of
the company to provide their staff with
the training necessary for handling
electrical devices and to make sure
that they familiarize themselves with
the contents of this user manual.
High amount of current constantly
circulates through the system and any
physical contact could cause a serious
injury. Please ensure that only qualified
staff has access to the devices and
make sure that the system is switched
off or disconnected during handling.
Do not try to repair the device on your
own in case of any malfunction. If this
occurs, contact Monsol Electronic’s
customer service. The system does not
require any special cleaning or main-
tenance, except for standard physical
maintenance required by any current
conducting electrical device connected
with screws and terminals that need to
be tightened