clic MONITOR CCM WIFI, Руководство пользователя

Страница: 5 / 24

5
CcM WiFi Manual 2021
2. TECHNICAL
SPECIFICATIONS
Connectivity 802.11b/g/n
Maximum consumption 300 mW
Power supply 12 VDC
Dimensions 36 x 20 x 19.3 mm
Operating
temperature
-25…+50 °C
Protection degree IP20
Relative humidity 0...95 % at 45 °C
Protection against
overcurrent
Principal CcM device
connected to external
device (thermal-magnetic
switches or residual-
current circuit breakers)
2.1 ENVIRONMENTAL CONDITIONS
3. SAFETY
INSTRUCTIONS
Please read the below safety instructions and pre-
cautions before installation and use of the CcM WiFi
device.
3.1 SYMBOLS
General
caution
Electrical
hazard
General
information
Prohibited
3.2 PURPOSE
This device is designed to provide WiFi connection
to a principal CcM device (CcM2, CcM3 and CcM4),
which will measure voltage, current, power, energy
and harmonics distortion in single- or three-pha-
se electrical installations connected directly to the
load side of the thermal-magnetic switch or resi-
dual-current circuit breaker for use in both, indus-
trial and domestic installations.
The CcM WiFi devices should only be used for this
purpose. Monsol Electronic is not liable for any da-
mages caused by an inappropriate installation, use
or maintenance of the system.
To ensure safe use, the system modules must only
be used in compliance with the instructions in this
manual. Legal and safety regulations must also be
considered to ensure correct use.
The following symbols are used in this manual to
highlight and emphasise important information.
Their general meaning is as follows: