CLF Conan, Руководство пользователя, Страница: 12 / 20

DIMMER CURVE provides four dimming options
(
see picture below
):
Optically linear
Square law
S-curve
Inverse square law
l LINEAR – the increase in light intensity appears to be linear as DMX value is increased.
l
SQUARE LAW – light intensity control is finer at low levels and coarser at high levels.
l
INVERSE SQUARE LAW – light intensity control is coarser at low levels and finer at high levels.
l
S-CURVE – light intensity control is finer at low levels and high levels and coarser at medium levels. Whichever DIMMER
CURVE option you select
,
you can choose between NORMAL or SMOOTH dimming settings
:
l
NORMAL is the default setting. It gives a virtually instantaneous reaction when you dim from one intensity to another
,
but dimming slowly from one intensity to another may appear slightly uneven
.
l
The SMOOTH setting gives smoother dimming during slow changes in intensity, but it limits the speed of dimming
changes slightly
.
This makes it ideal for slow
,
smooth dimming
,
but a short time
-
lag may be noticeable if you try to dim
quickly from one intensity to another
.
l
The fixture factory default settings can be restored by applying a FACTORY SETTING
→
LOAD command
.
Restoring factory default settings
Standard Manual
DMX control mode is selected in the CONTROL MODE menu
.
The fixture has tow DMX control
modes
:
l
Standard (Standard mode – uses 10 DMX channels)
l
Manual mode (Extended mode – uses 4 DMX cmanual zoom)
and modes
CONTROL MODE
12
Dimming