WWW.CLF-LIGHTING.COM
3
PROTECTION FROM BURNS AND FIRE
•
The
exterior of the fixture becomes hot during use. Avoid contact by persons and materials.
Allow the fixture to cool for at least 5 minutes before handling.
•
Keep
all combustible materials (e.g. fabric, wood, paper) at least 100 mm away from the fixture.
•
Keep
flammable materials well away from the fixture.
•
Ensure that there is free and unobstructed airflow around the fixture.
•
Do
not illuminate surfaces within 200 mm of the fixture.
•
Do
not attempt to bypass thermostatic switches or fuses.
•
If you relay power from one fixture to another using power throughput sockets, do not connect more than ten
fixture fixtures in total to each other in an interconnected chain.
•
Connect
only other fixture fixtures to fixture power throughput sockets.
•
Do not connect any other type of device to these sockets.
•
Do
not stick filters, masks or other materials onto any optical component.
•
Do
not modify the fixture in any way not described in this manual.
PROTECTION FROM INJURY
•
Do
not look continuously at LEDs from a distance of less than 3 meters from the front surface of the fixture without
protective eyewear such as shade 4-5 welding goggles. At less than this distance, the LED emission can cause
eye injury or irritation. At distances of 3 meters and above, light output is harmless to the naked eye provided that
the eye’s natural aversion response is not overcome.
•
Do
not look at LEDs with magnifiers, telescopes, binoculars or similar optical instruments that may concentrate the
light output.
•
Ensure that persons are not looking at the LEDs from within 8.3 meters when the product lights up suddenly.
This can happen when power is applied, when the product receives a DMX signal, or when SERVICE menu items
are selected.
•
Fasten
the fixture securely to a fixed surface or structure when in use. The fixture is not portable when installed.
•
Ensure that any supporting structure and/or hardware used can hold at least 10 times the weight of all the devices
they support.
•
Allow
enough clearance around the head to ensure that it cannot collide with an object or another fixture when it
moves.
•
Check
that all external covers and rigging hardware are securely fastened.
•
Block
access below the work area and work from a stable platform whenever installing, servicing or moving the
fixture.
•
Do
not operate the fixture with missing or damaged covers, shields or any optical component.
