CLF Lighting Aorun, Руководство пользователя

Страница: 9 / 26

WWW.CLF-LIGHTING.COM 8.0
WWW.CLF-LIGHTING.COM 11.0
Test
AORUN
Test
AORUN
• Please use the round 3 or 5-pin XLR plugs & sockets offered by the manufacturer to connect the first output to the second input and
connect the second fixture’s output to the third fixture’s input. And in the same way for the rest. Connect the first fixture to a DMX controller.
• It is recommended to use a DMX signal terminator for the installation to avoid the electronic noise damage the digital control signal. The
DMX terminator is an XLR connector with a 120 1/2W resistor connected across pin 2 and 3. Which is then plugged into the output socket
on the last projector in the chain refer to the connection.
control panel
WWW.CLF-LIGHTING.COM 11.0
Test
AORUN
Test
AORUN