CLF Lighting Aorun, Руководство пользователя

Страница: 5 / 26

WWW.CLF-LIGHTING.COM 4.0
Safety Instruction
WWW.CLF-LIGHTING.COM
RNING!
e safety precautions in this section before
ng, powering, operating or servicing this
PROTECTION AGAINST ELECTRICAL SHOCK
The connection must be made with a power supply system including efficient earthing (Class I appliance according to
standard EN 60598-1). It is important to protect the supply lines of the fuxture from indirect contact and/or shorting to
earth by using appropriately sized residual current devices.
CONNECTION TO MAIN SUPPLY
Connection to the electricity main supply must be carried out by a qualified electrical installer. Check if the main
frequency and voltage corresponds with the values of the fixture as described on the fixture electrical data label.
This label also provides you the maximum number of fixtures to connect to the main supply in order to
avoid overloading. Do not use the power cable when the insulation is damaged. The damaged cable must be
repaired by the manufacturer or the distributor in order to avoid any dangerous situations.
TEMPERATURE OF THE EXTERNAL SURFACE
The maximum temperature that can be reached on the external surface of the fixture, in a thermally steady state, is 100°C.
MAINTENANCE
Before starting any maintenance or cleaning work on the fixture, cut off the power from the main power supply.
After switching off the power, do not remove any parts of the fixture, for at least 30 minutes to avoid any burns.
The fixture is designed to hold any splinters when the lamp explodes. The lenses must be mounted properly,
and when damaged, the lenses must be replaced with proper spare parts.
RNING!
e safety precaut ons in this section before
ng, powering, operating or servi ing this
roduct
LAMP
Carefully read the "operating instructions" provided by the lamp manufacturer and immediately replace the lamp
when damaged or deformed by heat.
BATTERY
This product contains a rechargeable lead-acid battery. To preserve the environment, please dispose the battery
at the end of its life according to the applied regulation.
The products referred to in this manual conform to the European Community Directives to which they are subject:
• Low Voltage 2014/35/EU
• Electromagnetic Compatibility 2014/30/EU