Cleyver HW25, Руководство пользователя

Страница: 5 / 8

6 7
2 CONNECT POWER ADAPTER TO BASE
3 DOCK THE HEADSET
2.1 Plug the power adapter into the por t marked on the base.
2.2 Connect the power adapter to the mains power socket.
3.1 Press the multiple function button Shortly, then the LED on headset will
start flash as Blue every 3s, the headset will be powered on.
And then press the multiple function button again or dock the headset and re-lift it,
the audio link indicator will be on, which indicate the connection between
headset and base is set up correctly.
3.2 If dock correctly, the headset battery will begin charging, if needed(LED will
flash when charging ). Please charge for 20 minutes or until the battery
indicator is steady green
4. CONFIGURING THE DESK PHONE AUDIO
Receiver adjustment
MIC adjustment
CLICK
Due to the large range of desk phone brands/models, the users need to adjust the
alignment of ODHW20/ODHW25 DECT for first time using. Adjusting the alignment
will enable the ODHW20/ODHW25 DECT to function correctly with your specific desk
phone. Additionally, it is also impor tant to adjust the microphone and receiver
volume for optimal sound quality.
4.1 Put on the headset.
4.2 Get a dial tone by pressing the headset
button on the desk phone, or by lifting
the desk phone handset.
4.3 Adjust the alignment. Adjust the multiple switch
at the back of the ODHW20 /ODHW25 DECT base,
and then compare the dial tone after rotating
sw the itch from A to G.
4.4 Choose the best switch position.
Please choose the position with loud, clear
and undistorted dial tone.
4.5 Make a call. Call a friend or
colleague to test your microphone and
receiver volume. Ensure the callee does
not adjust the volume on their side.
4.6 Adjust the microphone volume using
the microphone + / - volume buttons,
if your volume is too loud or too weak
for the callee.
4.7 Adjust the receiver volume using the
receiver + / - volume buttons, if your
callee’s volume is too loud or too weak
for you.
4.8 After the configuration, end the call.