Clevo NH70RZQ, Руководство по обслуживанию

Страница: 30 / 36

Disassembly
2 - 8 Removing the Hard Disk Drive
2.
D
is
a
ss
em
b
ly
5. Remove the screw from the HDD assembly ( Figure 4d ).
6. Slightly lift and pull up the tab out to release the hard disk assembly ( Figure 4e
).
7. Lift the hard disk assembly out of the bay ( Figure 4f
).
8. Remove screws
-
and bracket from the hard disk ( Figure 4g
)
.
9. Reverse the process to install a new hard disk ( make sure to properly press to seal all sides of the bottom
case especially near the vent area and do not forget to replace the screws).
21
22
23 24
25 26 27 28
d.
e.
f.
23
28
HDD System Warning
New HDD’s are blank. Before you begin
make sure:
You have backed up any data you want
to keep from your old HDD.
You have all the CD-ROMs and FDDs
required to install your operating system
and programs.
If you have access to the internet, down-
load the latest application and hardware
driver updates for the operating system
you plan to install. Copy these to a re-
movable medium.
g.
21
24
27
25
26
22
23. HDD Assembly
27. Bracket
28. HDD
• 3 Screws
Figure 4
HDD Assembly
Removal (cont’d.)
d. Remove the screws.
e. Slightly lift and pull the
HDD in the direction of
the arrow.
f. Lift the HDD assembly
out of the bay.
g. Remove the screws and
bracket from the HDD.