Clevo NH70RZQ, Руководство по обслуживанию

Страница: 29 / 36

Disassembly
Removing the Hard Disk Drive 2 - 7
2.D
is
a
ss
em
b
ly
Removing the Hard Disk Drive
The hard disk drive can be taken out to accommodate other 2.5" serial (SATA) hard disk drives with a height of 7mm
(h). Follow your operating system’s installation instructions, and install all necessary drivers and utilities (as outlined in
Chapter 4 of the User’s Manual ) when setting up a new hard disk.
Hard Disk Disassembly Process
1. Turn off the computer, and remove the battery ( page 2 - 5 ).
2. Remove the SD card cover and screws - ( Figure 3a ).
3. Open it up with the LCD on a flat surface, release the bottom case at point
-
and remove it ( Figure
3b
)
.
4. The HDD will be visible at point on the mainboard ( Figure 3c
)
.
6 1 2 16
17 18 19
20
2
a.
b.
1
3
4
5
17
13
20
6
7
8
9
11
12
14
15
10
c.
17
18
16
19
17
Figure 3
HDD Assembly
Removal
a. Remove the SD card
cover and screws.
b. Remove the bottom
case.
c. Locate the HDD.
17. Bottom Case
• 15 Screws